iLO did not detect the Agentless Management Service when this page was loaded. To view a full set of

[Feliperocp]

Dear, good afternoon!

Our ILO is displaying the following message below.

iLO did not detect the Agentless Management Service when this page was loaded. To view a full set of data on this page, ensure that AMS is installed and running. The software inventory data is displayed only when AMS is ready on the server.

But I couldn't understand how to install AMS, could you help me?

Our specifications are:

Server: ProLiant DL380 Gen10
License Type: Ilo Standard
ILO Version: 5 (2.33)
Operating System Installed on Server: VMware ESXi, 7.0.1, 17551050

[hunter86_bg]

Just follow the instructions from https://support.hpe.com/hpesc/public/swd/detail?swItemId=MTX_4eee0f5a257e4c01a489046663#tab3

[AmRa]

Installing AMS
Procedure
1. Obtain AMS from one of the following sources:
• Download the SPP (Windows, Red Hat Enterprise Linux, SuSE Linux Enterprise Server) from the following website: Click here to download the service pack for ProLiant .
• Download the software from the Hewlett Packard Enterprise Support Center (Windows, Red Hat Enterprise Linux, SuSE Linux Enterprise Server, VMware) Click here to access the HPESC website .
• Download the software from the vibsdepot section of the software delivery repository website Click on below link to access the software delivery repository .

http://vibsdepot.hpe.com/hpe/may2021/

• AMS is also included in the customized Hewlett Packard Enterprise VMware ISO images that are released on Hewlett Packard Enterprise Software Depot.
• Subscribe to the Linux Management Component Pack (Ubuntu).
2. Install the software.
For instructions on using the SPP, see the SPP documentation Click here to access the Hewlett Packard Enterprise Information Library .
For other download types, follow the installation instructions provided with the software.

Verifying AMS status: VMware
Procedure
1. Verify that AMS is installed.
a. Access the VMware host from the VMware vSphere Client.
b. Navigate to the Inventory > Configuration > Health Status tab for the server.
c. Click the plus sign (+) next to Software Components.
The software installed on the host is listed. The AMS component includes the string amsd.
The full name of the AMS component is different for each supported version of ESX/ESXi.
2. To verify that AMS is running, enter the following command:/etc/init.d/ams.sh stat

Restarting AMS
Procedure
• VMware - Enter the following command: /etc/init.d/ams.sh restart.

For details information please refer HPE Integrated Lights Out (iLO 5) for Gen10 Servers - Configuring iLO Management Settings

https://support.hpe.com/hpesc/public/docDisplay?docLocale=en_US&docId=emr_na-a00026111en_us#N10118