HPE Community
ProLiant Servers (ML,DL,SL)
1757024 Members
1835 Online
108858 Solutions
New Discussion юеВ

Re: problems booting with kernel 2.4.x

 
Ayman Altounji
Valued Contributor

тАО03-01-2001 04:00 PM

тАО03-01-2001 04:00 PM

problems booting with kernel 2.4.x

Has anyone succesfully booted off the latest kernel 2.4.x on a proliant 5500? My configuration fails to initialize scsi devices at bootup.
btw, 2.2.x works fine. Help :)
0 Kudos
Reply
2 REPLIES 2
Ayman Altounji
Valued Contributor

тАО05-05-2001 04:00 PM

тАО05-05-2001 04:00 PM

Re: problems booting with kernel 2.4.x

I have a quad processor Pentium pro that will boot with a single processor kernel but not an amp kernel. it also worked fine under the 2.2.x kernel.

it hangs up when it reads the partition table.
0 Kudos
Reply
Ayman Altounji
Valued Contributor

тАО09-03-2002 04:00 PM

тАО09-03-2002 04:00 PM

Re: problems booting with kernel 2.4.x

This kernel should work, I would make sure you are using the latest one to get the latest drivers, and also make sure all the firmware on the system is up to date.
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.