VPAR question !!!

[gigiz]

Hallo,
I have some question about Vpar ...
1)Can exist 2 or more vparmanager in one npar?
2)what happens if in a one npar with 3 vpar i remove a vparmanager ?
3)Is it true that from every vpar i can reset or restart every other vpar?
4)What is a function of vparmanager and his limit?

[Ajitkumar Rane]

qiqiz,

Yes 2 or more i guess upto 4 vpars can exist in 1 npar, and it is possible to reboot a vpar from another vpar.

Rgds,

Ajit

[Chan 007]

Hi,

Check the link,

it has all the info you are looking for

http://docs.hp.com/en/T1335-90018/index.html

Chan

[HGN · Accepted solution]

Hi

1)Can exist 2 or more vparmanager in one npar?
vparmgr is used to managing the virtual partitions
2 or more virtual partitions can exist on a npar

2)what happens if in a one npar with 3 vpar i remove a vparmanager ?
By using vparmgr you can modify/delete/create virtual partitions

3)Is it true that from every vpar i can reset or restart every other vpar?
You can reset other vpar from the current vpar

4)What is a function of vparmanager and his limit?
Create VP(Virtual Partition)
Modify VP
Delete VP
Display Resources assigned to each partition
Display status of each VP
Display logs of vpars
Boot a VP
Reset a VP

Hope this information is useful.

Rgds

HGN

[Torsten.]

the vparmgr (virtual partitions manager frontend/GUI) product is only a graphical interface to the commands. the commands are available in every single vPar.

BTW, the GUI is only available for the 11i v1 versions (up to 3.03) and not for 11i v2 (vpars 4.xx).

this is my summary:

1) yes - give every vPar a GUI
2) nothing - you'll remove the GUI - not the commands
3) yes - vPar commands are sent to VPMON
4) it's just nice to see, a GUI. You have to run a vPars environment (VPMON have to be loaded) to use the GUI.

This is the real limit - you have to set up the first vpar without the GUI.

[Sivakumar TS]

Hello,

Hi

1)Can exist 2 or more vparmanager in one npar?

YES, its possible


2)what happens if in a one npar with 3 vpar i remove a vparmanager ?

you can alter the vpars inside a npar at anytime.


3)Is it true that from every vpar i can reset or restart every other vpar?

YES

4)What is a function of vparmanager and his limit?

It is used to create,modify,remove vpars

the limit could be

the vpars should be in same npar !

Regards,

Siva.

[gigiz]

so and so