Help - ES80 MBM error during power on

[IDXLUCKY]

Hi

I have installed a re-purposed ES80 M6 server in a cabinet and connected the three drawers using the IP cables - but we are having some trouble getting the ES80 powered on.

We are using a serial terminal directly to the MBM backplane of drawer 0.

I have been unable to find documentation on how to get around this error:

MBM>
MBM> POWER ON
~CLI-W-(tCLImodem) replicated database not synchronized

..[2013/04/12 11:39:17]
~PCO-W-(pco_01) DB access error Id:339 cmd:408

.~CLI-E-(tCLImodem) error in accessing database

MBM>
MBM>

I was wondering anyone could provide me with some assistance/guidance in getting this error resolved?

thanks

-Dennis

[Steve Begley]

Hi Dennis,

You are plugged into the serial port of drawer 0 - looks like your problem is

that the Interprocessor links can detect the other drawers but the Management

LAN cannot see the other MBMs - I think you will need to plug all the MBMs into

a switch so the server management LAN can see the other drawers.

Please let me know how it goes.

Kind regards,

Steve.B.

[IDXLUCKY]

Hey Steve,

Thanks for your response - I do have all three drawers (mbm internal lan connector) plugged into the nat box.

Here is what the startup looks like:

MBM>
MBM> 00 01 02 03 04 05 06 07 08 09 Attaching interface lo0...done

                 VxWorks

Copyright 1984-1998  Wind River Systems, Inc.

            CPU: AMD SC520 CDP
        VxWorks: 5.4.2
    BSP version: 1.2/0
  Creation date: May  7 2003
            WDB: Ready.

ES80 Server Management Failsafe Loader V2.1-1 Starting up

Image built on May  7 2003 at 10:37:56
~FLD-W-(tRootTask) Flash Directory changed - using old

Cabinet number: 00
Drawer number: 0
Micro type: MBM
Node IP address: 10.0.0.1
Press enter to remain in FSL.

boot device          : flash
unit number          : 0
processor number     : 0
host name            : host
file name            : vxWorks
inet on ethernet (e) : 10.250.250.250
host inet (h)        : 10.253.0.254
user (u)             : target
flags (f)            : 0xa0
other (o)            : fei

06 07 08 09 Attaching interface lo0...done

Adding 5894 symbols for standalone.

                 VxWorks

Copyright 1984-1998  Wind River Systems, Inc.

            CPU: AMD SC520 CDP
        VxWorks: 5.4.2
    BSP version: 1.2/0
  Creation date: Jan 29 2007
            WDB: Ready.

ES80 Server Management  V2.7-6 Starting up

Image built on Jan 29 2007 at 15:13:06
Running POST ...
0A 0B 0C 0D 0E
CPLD Rev 5 OK
Cabinet number: 00
Drawer number: 0
Micro type: MBM
Node IP address: 10.0.0.1
~GRP-W-(tRootTask) Joined Group ID: 100000a.1

Forming group......interrupt: ~GRP-I-(interrupt), GROUP HAS FORMED ID:100000a.1
......interrupt: ~GRP-I-(interrupt), GROUP IS STABLE ID:100000a.1
.
DHCP server started.
pco_task started as pco_00
pco_task started as pco_01
pco_task started as pco_02
pco_task started as pco_03
pco_task started as pco_04
Welcome - ES80 Server Manager - V2.7-6
[2013/04/12 11:33:12]
~REC-W-(trecTask) Server management group is transitioning.
[2013/04/12 11:33:12]
~REC-W-(trecTask) Server management group is stable.

MBM>
MBM> SHOW POWER
Cabinet OCP switch position: ~SMG-W-(tCLImodem) Timed out waiting for response 18 from 10.253.0.1

       10.0.0.1      10.253.0.1   ID: 18   ENVIRONMENTAL  GetSwitchState     (C)
Unknown

Cab Drw Type   Power   Fan   WPI/SDI      PS/VRM      Temperature( C)    Voltage
                     0123456   0123   0123456789ABC   0    1    2    3 
~SMG-W-(pmus_01) Timed out waiting for response 19 from 10.0.0.1

       10.0.0.1        10.0.0.1   ID: 19   ENVIRONMENTAL  GetSwitchState     (C)
 0   0  SBB     OFF  ~SMG-W-(smprot) No outstanding command for response from 10.0.0.1 cmd:8907

       10.0.0.1        10.0.0.1   ID: 19   ENVIRONMENTAL  GetSwitchState     (R)  0x0000
ppppppp   ....   pp...........  32.0 29.0 28.5 28.0     p
 0   0    DUO0  OFF  .......   ....   ppppp...ppppp  35.0 27.6 28.1 ....     p
MBM>

[Steve Begley]

Hi,

Try a set membership -auto from the MBM - you may need to re-scan the

console LAN.

Could you also post the output from the MBM commands sho net and

sho membership.

Please let me know how it goes....

Kind regards,

Steve.B.