Apollo 2600 Gen 9 no ILO ip adress

[peaksie]

Im stuggling to get access to ILO on my Apollo 2600 gen 9 server with RCM module.

I have connected the RCM module and attached a network cable, but im not able to access the web interface. It does not seem to have DHCP enabled so i have tried to scan the most common networks for it, but i cant find it...  Since im not able to connect a screen and keyboard im not able to change the ILO network settings. 

Is there any way you can reset this?

[AmRa]

Please refer HPE Apollo 2000 System User Guide (Page Number 156 to 158) to enable the dedicated iLO management module.

https://support.hpe.com/hpesc/public/docDisplay?docId=c04604560