bl460c g1 random shapes on ILO

[bradshr]

bl460c g1 showing random shapes and colours on the ILO. Tried cutting power to the slot and restarting, but no effect. Is this a hardware fault? We have the latest ILO version.

[Priyansha]

Hi,

You may try the following steps:

• Try diffrent browser
• Update Java
• Shutdown the server and reseat the server blade.

[bradshr]

thanks. I think  java is okay as  other blades work. Different browser and reseating blade did not fix. I guess it must be a hardware issue.

[Lincy_Zachariah]

You can try the following steps also :

• Clear NVRAM using System Maintenance Switch.
• Ensure the BIOS, iLO2 and OA firmware is supported as per Blade Compatibility Matrix.
• Reset iLO by completely removing the power to the Server.

If this does not work, it could be Hardware issue.