BL460c Gen10 no network error after spp update

[asadsarwarawan]

I recently applied last available spp 2021.10.1 for BL460c gen10. after spp upgrade the OS unable to find any networks adaptors. FlexFabric 10Gb 2-port 536 FlexibleLOM is unknown in ILO as well. after updating the server to the latest bios and ILO issue still persist. after physically reseating the server from the chassis, the issue resolved and network adaptors reappeared. This is not a viable solution for large environments. is there any vialble solution for this issue as we have a large amount of these servers.

[rmay_bk]

I've no resolution for this; only a suggestion that may expedite remediation...

You can emulate a blade reseat via "e-fuse." From the OA CLI, "reset server x" where x is the bay number. This is functionally equivalent to removing the blade and reinserting.