HPE Community
BladeSystem - General
1753831 Members
8936 Online
108806 Solutions
New Discussion юеВ

Re: c-7000 help!

 
Dave Chaisson
New Member

тАО02-11-2010 05:23 PM

тАО02-11-2010 05:23 PM

c-7000 help!

My customer upgraded there firmware to 2.60 and upon the reboot they get a degraded state with 3 blades (windows blades) 3 of the other blades are fine there esx blades. The fiber mezz cards aren't seen by the oa. the os does see the cards. The ilo firmware is up to date and I had him reflash both the oa and the ilo but no luck even a reboot fixed nothing. has anyone seen this before?
0 Kudos
Reply
2 REPLIES 2
gregersenj
Honored Contributor

тАО02-12-2010 03:05 AM

тАО02-12-2010 03:05 AM

Re: c-7000 help!

Is the PMC firmware at 3.4?
If not you have to get them upgraded.

any version but 3.4 or 0.5 (Old blades), will give you a warning.

BR
/jag

Accept or Kudo

0 Kudos
Reply
Dave Chaisson
New Member

тАО02-14-2010 06:23 AM

тАО02-14-2010 06:23 AM

Re: c-7000 help!

Thanks I will try that tuesday.
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.