c7000 interconnect bays

[David Arnau]

Hello.

In my company we are implementing a platform using two c7000 enclosures and 20 bl460 servers, and we have a doubt about interconnect bays. In the c7000 specs says:

"Up to 4 different interconnect fabrics (Ethernet, FC, IB, iSCSI, SAS, etc.) supported simultaneously within the enclosure."

Based on this, is possible e.g., to have running in the same c7000 enclosure two Passthru modules and four HP GbE2c switches?

It the answer is afirmative, can I map one NIC of a Blade to a port in the Passthru, and the second NIC to a port in a switch?

Thank you in advance.

[Raghuarch]

is possible e.g., to have running in the same c7000 enclosure two Passthru modules and four HP GbE2c switches?
YES

can I map one NIC of a Blade to a port in the Passthru, and the second NIC to a port in a switch?
YES. Depends on where you have the interconnects.
Refer to port mapping attachment for more details.