BladeSystem - General
1748020 Members
4436 Online
108757 Solutions
New Discussion

Can't able to create a new VC profile

 
SOLVED
Go to solution
Jayaprakash Subramanian
Frequent Advisor

Can't able to create a new VC profile

Hello All,
We need to create a server profile on the VC (with VC assigned addressing). But when we try to create the profile, the error message #1 appears on the first screen.
When we continue to create the profile with server factory default, the error message #2 appears. The screen shots are also attached.
But the external-manager is not available if you see from the command line output.

Here are the details:

Product Name: HP Virtual Connect Manager
Firmware Version: 2.10
Firmware Date: 2009-04-17T03:54:28Z


Error messages:

1. Warning! The VC Domain profiles are externally controlled. MAC & WWN addresses have been overridden with Server Factory Defaults.
2. The VCM GUI is under the control of external manager, hence profile can not be created.

Some Command line outputs:

->show external-manager
No external manager exists

->show domain

Domain Name : VCD2
Checkpoint Status : Valid

-------------------------------------------------------------------------------
Virtual Connect Domain IP Address Settings
-------------------------------------------------------------------------------
Domain IP Status : Disabled
IP Address : -- --
Subnet Mask : -- --
Gateway : -- --

-------------------------------------------------------------------------------
Ethernet MAC Address Settings
-------------------------------------------------------------------------------
MAC Address Type : External

-------------------------------------------------------------------------------
Fibre Channel WWN Address Settings
-------------------------------------------------------------------------------
WWN Address Type : External


->show profile
=======================================================
Name Device Bay Server Status
=======================================================
CMS enc0:1 ProLiant BL680c G5 Degraded
ESX_Host_2 enc0:2 ProLiant BL680c G5 Degraded
ProLiant_3 enc0:3 ProLiant BL680c G5 OK
Integrity_2 enc0:4 server BL860c Degraded
Integrity_3 enc0:5 server BL860c Degraded

->add profile Linuxblade
ERROR: Operation not allowed : Current MAC and WWN pool settings does not allow
creation of profiles

Also If we add the network or storage address, it shows the following error message :

->add enet-connection LinuxBlade AddressType=Vc-Defined
ERROR: Invalid property value (AddressType) : Valid values include:
Factory-Default,User-Defined

->add fc-connection LinuxBlade Fabric=SAN_3 AddressType=Vc-Defined
ERROR: Invalid property value (AddressType) : Valid values include:
Factory-Default,User-Defined

Is there anything wrong in the configuration we did?

Please advise.

Thanks,
Jayaprakash S
1 REPLY 1
JKytsi
Honored Contributor
Solution

Re: Can't able to create a new VC profile

Is there a VCEM (Virtual Connect Enterprise Manager) in use ? If yes, You can't do configuration changes from VCM. You have to do it from VCEM.
Remember to give Kudos to answers! (click the KUDOS star)

You can find me from Twitter @JKytsi