Converting c7000 from 3 phase to single phase power

[Kerry Quillen]

I have a need to convert 2 c7000 chassis from three phase input power to singe phase.  My reseach tells me that this can be done simply by swapping the power module and then enter command 'Set enclosure pdu_type 1' via SSH session to the OA.  Power modules were hard to come by but finally found some from an authorized HPE parts distributor.  However, the only ones I could find that weren't refurbs are the newer intelligent power modules (p/n 666226-001).  My question is are these intelligent power modules backward compatible with all c7000 chassis?  I don't intend to use any of the intelligent features.  One of my c7000's is fairly old so I have some concerns.

[ajav01]

HI ,

yes, it is compitable to all Geneations of C7000 enclosures, if your not using blue cables with iPdu intelligent features.

regards

Javeed