HPE Community
BladeSystem - General
1753405 Members
7325 Online
108793 Solutions
New Discussion

Latest iLO2 version for G5 blades

 
ivaideanu
Occasional Contributor

‎10-14-2015 07:59 AM

‎10-14-2015 07:59 AM

Latest iLO2 version for G5 blades

I'm trying to find out if 2.29 is a supported version for the bunch of BL260c G5 servers that we have.  Right now they are running 2.27, although the latest version available when searching drivers and software for that model is 2.25 (but I'm pretty sure 2.27 was listed at some point, otherwise I wouldn't have used it).

 

My question:  is 2.29 a supported iLO2 version for BL260c G5?  If not, is 2.27 one, or should I downgrade to 2.25?

 

Thank you.

0 Kudos
Reply
1 REPLY 1
Torsten.
Acclaimed Contributor

‎10-14-2015 08:22 AM

‎10-14-2015 08:22 AM

Re: Latest iLO2 version for G5 blades

Even G1 blades are using ILO2, but hardware after EOL is no longer tested, hence the last tested version is listed.

But it is the same ILO, so it works with newer versions too.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.