OA not communicating with ILO

[Mpett2]

I have 3 enclosures linked together and have 6 blade BL465 servers that tell me ( The Onboard Administrator cannot communicate with iLO. Please check iLO network configuration) has anyone seen this.

Firmware
OA 2.20
ILO 1.50

[Raghuarch]

Can you open ILO links after login to OA.
Are you able to access the iLO with their IP address.

[JKytsi]

Does OA reboot make any difference ? And You are using Ebipa ?

[Mpett2]

Yes I can log into the ilo indepently but not through the auto logon. Right now the ilos are using dhcp.

[Raghuarch]

Did you try rebooting the OA?
OR
Reseting the ILo ?

[Mpett2]

Yes and the wiered thing is its on all 3 enclosures and 6 in each are reporting this.

[Lmm_1]

Hi Mpett2,
Are the iLO´s and OA on same subnet?

[Raghuarch]

Login to OA CLI and Execute the command
"reset server "
Note: When you try this command the OS will Go down there will be no connectivity till it boots UP. This should fix the Problem.

[Mpett2]

How do you log in to the OA CLI? and yes they are all on the same subnet. THanks

[Raghuarch]

DO Telnet or SSH to OA IP address.
It will ask you for Username and Password.
Login.