BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

OA not communicating with ILO

 
Highlighted
Advisor

OA not communicating with ILO

I have 3 enclosures linked together and have 6 blade BL465 servers that tell me ( The Onboard Administrator cannot communicate with iLO. Please check iLO network configuration) has anyone seen this.

Firmware
OA 2.20
ILO 1.50
13 REPLIES 13
Highlighted
Honored Contributor

Re: OA not communicating with ILO

Can you open ILO links after login to OA.
Are you able to access the iLO with their IP address.
Highlighted
Honored Contributor

Re: OA not communicating with ILO

Does OA reboot make any difference ? And You are using Ebipa ?
Remember to give Kudos to answers! (click the KUDOS star)

You can find me from Twitter @JKytsi
Highlighted
Advisor

Re: OA not communicating with ILO

Yes I can log into the ilo indepently but not through the auto logon. Right now the ilos are using dhcp.
Highlighted
Honored Contributor

Re: OA not communicating with ILO

Did you try rebooting the OA?
OR
Reseting the ILo ?
Highlighted
Advisor

Re: OA not communicating with ILO

Yes and the wiered thing is its on all 3 enclosures and 6 in each are reporting this.
Highlighted
Honored Contributor

Re: OA not communicating with ILO

Hi Mpett2,
Are the iLO´s and OA on same subnet?
Highlighted
Honored Contributor

Re: OA not communicating with ILO

Login to OA CLI and Execute the command
"reset server "
Note: When you try this command the OS will Go down there will be no connectivity till it boots UP. This should fix the Problem.
Highlighted
Advisor

Re: OA not communicating with ILO

How do you log in to the OA CLI? and yes they are all on the same subnet. THanks
Highlighted
Honored Contributor

Re: OA not communicating with ILO

DO Telnet or SSH to OA IP address.
It will ask you for Username and Password.
Login.