Onboard Administrator redundancy lost

[Aamir Majeed]

Hi,
Two On Board Administrator modules are installed in C 7000 enclosure, but an alert is displayed on Insight display "OA redundancy has been lost", while I have checked by changing positions both OA modules are working fine.

Secondly all of the bl 460c blade servers are detected by OA, mezzanine cards are also shown against each server but the RAM and CPU specifications are not displayed in Insight display.

[James ~ Happy Dude]

Hello Aamir,

Can you navigate to "FIX THIS" using the navigate buttons? ? (since you know that the OAs are FINE !)

Regards,
James.

[Aamir Majeed]

When I navigate to Fix button, same messege is displayed i.e. "OA redundancy has lost".
When both of the modules are used in bay one turn by turn both of them are working.
but as soon as second module is installed in bay two same alert is generated.

[James ~ Happy Dude]

What does the SYSLOG report say ?

This can be possible if both OA are on different Firmware Versions.

James.

[Aamir Majeed]

Dear,
Can you please guide me steps to resolve the issue as it is first time I am deploying C 7000 enclosure.
Waiting for your kind response.

[James ~ Happy Dude]

Aamir,
Start with the Firmware Version of OA;
One-by-one.

James.

[James ~ Happy Dude]

Refer:
h20000.www2.hp.com/bc/docs/support/SupportManual/c00705292/c00705292.pdf

How have you configured the OA IP address ?

James,

[James ~ Happy Dude · Accepted solution]

Aamir, refer Page 87 & 88 on that user guide;

:)

[James ~ Happy Dude]

How did it go Aamir ?

[Aamir Majeed]

Dear,
Can you plz help me out in order to solve my second issue, i.e. CPU and RAM specs of Blade servers are not displayed in Insight display.

Thanks.