BladeSystem - General
1748280 Members
3693 Online
108761 Solutions
New Discussion юеВ

Re: SIM agents for c7000 enclosure?

 
SOLVED
Go to solution
hpnewguy
New Member

SIM agents for c7000 enclosure?

Hi,

I was wondering if it is possible to configure the c7000 blade system enclosure so that it integrates with our SIM server in order for it to be monitored - if so can somebody let me know how or point me in the rite direction?

8 REPLIES 8
P Muralidhar Kini
Honored Contributor

Re: SIM agents for c7000 enclosure?

Hi hpnewguy,

Welcome to the ITRC forum.

Check the following links -

* HP BladeSystem c7000 Enclosure Setup and Installation Guide
http://h20000.www2.hp.com/bc/docs/support/SupportManual/c00698286/c00698286.pdf

* HP BladeSystem c7000 Enclosure Quick Setup Instructions
http://h20000.www2.hp.com/bc/docs/support/SupportManual/c00698534/c00698534.pdf

* PDF - HP BladeSystem c7000 Enclosure
http://h18000.www1.hp.com/products/quickspecs/12810_div/12810_div.pdf

Hope this helps.

Also, as you are new to the forum
Refer the following link which says how you can thank the forum -
http://forums13.itrc.hp.com/service/forums/helptips.do?#28

Regards,
Murali
Let There Be Rock - AC/DC
hpnewguy
New Member

Re: SIM agents for c7000 enclosure?

Hi,

I have read those documents but couldnt find what i was after - unless ive completely missed it. Is there a step but step or some sort of admin guide detailing how to install the agents?
Markus M.
Trusted Contributor
Solution

Re: SIM agents for c7000 enclosure?


Hi,

with your SIM installtion you already have a module for blade center integration.

On the OA web interface, under "Users/Authentication", there is a part "SIM integration" - import the SIM certificate, discover the active OA and see the results...

regards
Markus

btw: all this is mentioned in the above linked docs!
hpnewguy
New Member

Re: SIM agents for c7000 enclosure?

Excellent...i will go over those docs again with a fine tooth comb and look out for what you mentioned.

thanks for your assistance
hpnewguy
New Member

Re: SIM agents for c7000 enclosure?

OK im being really tick here...but i cant find anything relating configuring/discovering the c7000 enclosure or SIM integration in the above docs. Can you point out which page you read extracted your info from?

Sorry for the trouble
BrianDoyle
Trusted Contributor

Re: SIM agents for c7000 enclosure?

Hi hpnewguy,

Did you install SIM through the Insight Control DVDs?

BladeSystem Integrated Manager is a plug-in to HSIM and installs automatically with HP SIM

Go to Discovery in SIM and run a search for the active OA IP address.

This will find the Blade Enclosure and you can use the integrated manager.
P Muralidhar Kini
Honored Contributor

Re: SIM agents for c7000 enclosure?

Hi hpnewguy,

>> but i cant find anything relating configuring/discovering the c7000 enclosure
* HP BladeSystem c7000 Enclosures
http://h200003.www2.hp.com/bizsupport/TechSupport/SupportTaskIndex.jsp?lang=en&cc=de&taskId=115&prodTypeId=3709945&prodSeriesId=1844065
This talks about Setup, install, and configuration.

>> thanks for your assistance
The way you thank responses in this forum is by assigning points.

Regards,
Murali
Let There Be Rock - AC/DC
hpnewguy
New Member

Re: SIM agents for c7000 enclosure?

Hi guys,

Ive done what you suggested however all i see in our SIM console is a green tick under HS, 'i' under VPM, system name, unknown under system type, and an ip address under system address.

when i click on system name it takes me to the system page but doesn't show as much info as the other 'normal' servers (e.g dl360s)

sorry for the trouble...