VC-Flex 10/DAC for Nexus 2232 switch?

[chuckk281]

Josh had a cable compatibility question:

**************

Can you tell me if we have a DAC cable that will connect the Flex-10 module to the Nexus 2232 and be supported?

*************

Input from Mark:

******************

VC 3.70 supports this per Release Notes. This is applicable to Flex-10 modules.

http://bizsupport2.austin.hp.com/bc/docs/support/SupportManual/c03478436/c03478436.pdf

Version 3.70 of Virtual Connect contains support for the following enhancements:

• • Support for new hardware:

o HP Virtual Connect Flex-10/10D Module

o HP ProLiant BL660c Gen8 Server series

o HP ProLiant WS460c Gen8 Workstation series

o HP Integrity BL860c i4 Server Blades

o HP Integrity BL870c i4 Server Blades

o HP Integrity BL890c i4 Server Blades

o HP 7m C-series Active Copper SFP+ cables (QK701A)

o HP 10m C-series Active Copper SFP+ cables (QK702A)

o Cisco 7m copper active Twinax cables (SFP-H10GB-ACU7M)

o Cisco 10m copper active Twinax cables (SFP-H10GB-ACU10M)

Cisco docs state this

http://www.cisco.com/en/US/prod/collateral/switches/ps9441/ps10110/data_sheet_c78-568589.html

Twinax Cables Certification Matrix for Nexus 2000 and Nexus 5000 Switches

****************

Other comments or suggestions?