Virtual Connect Manager

[D.Nguyen]

Hi All,

This is my first time working with Blade Server. I have Blade C7000 Enclosure, with two Onboard Administrator Firmware version 1.30, and two HP 1/10Gb VC-Enet Module.

I logged on OA and trying to connect to the VC. According to the Virtual Connect User Guide, I can connect to Virtual Connect Manager via either within Onboard Administrator or DNS name with the Default Network Setting on the label.

But I couldn't access the Virtual Connect Manager via DNS Name, and within Onboard Administrator I don't see the Virtual Connect Manager link, which is according to the the User Guide, it should be below Insight Display.

I would really appreciate for help from the Blade Expert out there. Please see attached doc. for details.

DTNguyen

[D.Nguyen]

Configured Interconnect Bays IP addresses.