HPE Community
BladeSystem - General
1753813 Members
7735 Online
108805 Solutions
New Discussion юеВ

Re: Vmware Lun

 
GB7
Occasional Advisor

тАО08-13-2008 10:56 PM

тАО08-13-2008 10:56 PM

Vmware Lun

I am having some problem with VMware 3.5 ESX and EVA 4400. I have created a LUN, mapped the WWN of the Mezzanine card to the LUN, but while scanning the storage/LUN, it is not detected.
VMkernel, VMotion and IP storage have already been installed and configured.
Any idea how to get it to work?

Thanks.
0 Kudos
3 REPLIES 3
sterls27
Frequent Advisor

тАО08-15-2008 05:58 AM

тАО08-15-2008 05:58 AM

Re: Vmware Lun

Are you using any virtual WWN's? Or just the physical WWN's from the mezz cards? I've had some of our ESX blades have issues with updating the storage from the SAN, whether it's allocating additional storage from the SAN or extending the LUN. What update version of ESX are you running? Also, what is the firmware for the HBA's on the ESX Hosts?
0 Kudos
JKytsi
Honored Contributor

тАО08-16-2008 02:01 AM

тАО08-16-2008 02:01 AM

Re: Vmware Lun

Do You see the LUN from HBA BIOS (CTRL+Q in server POST) ? If not, then there is a zoning issue or physical connection is not right.
Remember to give Kudos to answers! (click the KUDOS star)

You can find me from Twitter @JKytsi
0 Kudos
GB7
Occasional Advisor

тАО08-27-2008 08:44 AM

тАО08-27-2008 08:44 AM

Re: Vmware Lun

The problem was with Mezz card.
got them replaced, now everything is working fine.

http://forums11.itrc.hp.com/service/forums/questionanswer.do?threadId=1254520
0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.