Vmware with BL460c G10 issue

[abitos]

I have a BL460c server with VMware ESXi OS, 7.0.3, 22348816. In which I get the following error within the OS.

It has a HP QMH2672 16Gb FC HBA Bladesystem c-Class with firmware 06.02.01 and driver qlnativefc_5.3.1.0-1OEM.703.0.0.18644231

Has something similar happened to anyone else?

[support_s]

System recommended content:

1. HPE VMware ESXi 6.7 U3 Customized Image Release Notes for October 2020

2. Smart Update Manager 8.8.2 Release Notes | SUM displays driver/software components as selected during first run on a Gen10 server with ESXi 7.0 when iLO 5 firmware version is less than 2.15

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

Thank you for being a HPE valuable community member.

[shiva_jr]

Hi @abitos ,

Most common causes for PSOD errors are Hardware changes, driver or firmware updates/downgrades, moving the system might cause loose connection of RAM, disk and the cables etc.

1)    On which storage devices you have installed the OS ? 
      If you installed on any flash/USB devices, it won't work.  If installed on the HDD, please check the size of the HDD. 

2)  Are you getting this Pink screen of death (PSOD) on first reboot after the Esxi installation ? 
     Yes - better to reinstall the Esxi by selecting the proper disk.  No - please work on changes made on hardware such as adding or removing or reseating DIMM, disk etc and firmware update.

3) Are you getting PSOD after any driver or firmware update ? 
    Yes - that caused the issue, please revert.

4) Did you check the compatibility or support of HDD, OS version on Server ?
    No - Any one of the above may be the issue of compatibility. Take action accordingly.

5) Did you try to modify any partition size such as /,  dump partition , root partition etc.
    Yes- please revert it.

6) HBA driver also may cause the issue. Refer this docuement.

7) It may solve the issue, even by upgrading all the device firmwares using SPP, OS version/patch update.

 I hope, my post helped you, if yes, please give 'Kudos' and mark my post as 'Accepted solution.'  Please let me know if the issue persists.
 

Regards,
Shiva_jr

[support_s]

Hello,

Let us know if you were able to resolve the issue.

If you are satisfied with the answers then kindly click the "Accept As Solution" button for the most helpful response so that it is beneficial to all community members.

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".