HPE Community
Communications and Wireless
1833413 Members
2961 Online
110052 Solutions
New Discussion

Blinking LEDs

 
Ayman Altounji
Valued Contributor

‎01-12-2002 04:00 PM

‎01-12-2002 04:00 PM

Blinking LEDs

I have had my WL400 access point for nearly a year with no problems. All of the sudden the left and right LED lights are blinking. The one on the right blinks red. The Wl400 will no longer insert in to the ethernet hub. I have tried resetting the unit, changing cables, and power cycling several times but nothing works. Please advise.

Tim
0 Kudos
1 REPLY 1
Ayman Altounji
Valued Contributor

‎05-20-2002 04:00 PM

‎05-20-2002 04:00 PM

Re: Blinking LEDs

change the power supply.

i have changed at least 10 power supplies in the last few month after using the wl400 for about a year.

go to radio shack and get a cheapo
0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.