HPE Community
Communications and Wireless
1821068 Members
2831 Online
109631 Solutions
New Discussion

Re: W450 802.11g not accessing 802.11b access point Win2K

 
Glen Sedam
New Member

‎03-12-2004 10:44 PM

‎03-12-2004 10:44 PM

W450 802.11g not accessing 802.11b access point Win2K

Hello,

I have a customer with W450 Wirless card (internal card) and I can not get the card to recognize a active 802.11b access point. The system in question has Win2K on in and the utility show no activity. The utility is not allowing be to creat a profile ether.

Thank you for your help.
0 Kudos
1 REPLY 1
STEVEN LEE_12
Frequent Advisor

‎03-14-2004 02:27 AM

‎03-14-2004 02:27 AM

Re: W450 802.11g not accessing 802.11b access point Win2K

Firts and foremost, there are still many compatibility problems between 802.11b and 802.11g devices of different brands and models.

The 802.11b Access Point that your customer has may not be recognizing signals from 802.11g wireless cards.

Check with the AP manufacturer to find out there is a firmware upgrade that is required.
0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.