Wireless Lan with WL410 and WL210 not responding for netbios neighborough

[Magnon Daniel]

i have one WL410 access Point configure as access point and all default setting
i have 3 pc's with WL210 card and lan is OK

but when i open network neiborough, no pc appear but this on which i am logged.

if i search other pc's, sometime it is found, not regularly.
the ping for all the pc's is OK

question: does the WL410 filter the netbios broadcast by default ?
if yes, where may i open the netbios broadcast ?

[Jerome Henry]

Hi,

Normally the wl410 transmits all, included netbios messages.

What are your OS ? The fact that sometimes PC are found, sometimes not indicates more a reception problem than an access point one.

When you do 'start/run/other_PC_IP' do you get through 100 % time ?

J