Comware Based
1748252 Members
3754 Online
108760 Solutions
New Discussion

Re: 10500 Line card specifications

 
James-W
Occasional Advisor

10500 Line card specifications

Hi, 

 

I am trying to find line card spec's for the 10500 chassi range. I have built the chassis and basic spec via Iris, and have found the LPM through put etc, but l am looking for PDF that show me the what the line cards spec's are.

 

Can some one point me on the right direction, as l have been unable to find this to date.

 

Line cards information l am looking for is -

 

JC616A   JC621A JC623A JC630A

 

Any help is greatly appreciated.

 

Best regards, 

James

9 REPLIES 9
MichaelM55
Trusted Contributor

Re: 10500 Line card specifications

might be wrong, contact HP, they should know better...

 

part number 	description 		BW to backplane Gbps 	Line Rate
JC624A 		4 port 	10GE 		64   			Yes
JC627A
JC620A
JC629A (EB) 	8 port 10 GE 		144 			Yes
JC630A (EA) 	8 port 10 GE 		64 			No
JC631A (SE) 							Oversubscribed 1.25:1
JC628A (SC) 	16 port 10 GE 		160 			Yes
JC621A (EA) 	24 port 1 GE 		64 			Yes
JC626A (EB) 	2 port 10 GE
JC617A (SE)
JC622A (EA) 	48 port 1 GE (cu) 	64 			Yes
JC623A (EA) 	48 port 1 GE (SFP) 	64 			Yes
JC625A (EB)
JC619A (SE)

 

James-W
Occasional Advisor

Re: 10500 Line card specifications

Thanks Michael, did you get this on the H3C website or HP?

 

I need to try and reference a few other cards in the 10500, to replace Cisco 6509-E & V type chassis blades.  

 

I have obtained some information, but this only informs you of the table sizes per line card and not what the overall spec's of the line card are.

 

MichaelM55
Trusted Contributor

Re: 10500 Line card specifications

If you have a friendly HP representative, he might give you the  "HP A10500 Switch Family Technical Product Guide", which will answer you every question you have about that switch. (No, I don´t have that one)

James-W
Occasional Advisor

Re: 10500 Line card specifications

Cheers. Be there done that, short answer was they do not have specifc's for line cards just the overall chassis.

MichaelM55
Trusted Contributor

Re: 10500 Line card specifications

This is that I don´t like about HP, it´s information politics.

Ask again.They might not know, but there are infos about specific line cards for all modular switches very well. And yes they are even in english, e.g.

MichaelM55
Trusted Contributor

Re: 10500 Line card specifications

And if they don´t we will eaily find another switching platform for you serving your needs. So, please give some infos:

 

- budget:

- access/distribution/core/datacenter switch?

- amount of 10Gbe ports?

- amount of 1Gbe ports?

- dual fabric?

- Amount of virtual routing instances?

- which unicast/multicast routing support within routing instances?

- integrated NAT?

- integrated stateful firewall?

- integrated IDS?

- integrated IPv6 firewall?

- routing table size (IPv4)?

- routing table size (IPv6)?

- IPv4 routing? BGP, ISIS, OSPF, RIP, static?

- IPv6 routing? BGP, ISIS, OSPF, RIP, static?

- multicast: PIM-DM, PIM-SM, PIM-SSM?

- IPv6 multicast: PIM-DM, PIM-SM, PIM-SSM?

- MPLS?

- VPLS?

- Running VPLS over GRE tunnels?

- VXLAN?

- TRILL?

- SPB?

- ...?

 

 

James-W
Occasional Advisor

Re: 10500 Line card specifications

Thanks MIchael.

 

Budget is to replace a Cisco 6509-E.

 

Line cards are -

 

8 port 10Gb (8 ports total per chassis)

24 port SFP Gb (48 ports total per chassis)

48 port RJ45 Gb (96 ports total per chassis)

Integrated FW module in chassis 

 

4 chassis's in Total

 

OSPF routing

126k IPV4 routes (going by MPS spec's)

 

2 core chassis, 2 distribution

MichaelM55
Trusted Contributor

Re: 10500 Line card specifications

Well, that integrated firewall module is kind of a problem. Is there a reason why you don´t buy 6509-E? Especially on refurbished marked, prices on all mentioned modules you mentioned cannot actually be beaten.

Needless to say that up to today, I have never seen a A10500 plus its module being sold at the usual shops selling refurbished hardware. (If you know on, please tell me about it, Haven´t seen actually "HP RENEW" chassis based switches so far)

Richard Litchfield
Respected Contributor

Re: 10500 Line card specifications

You could do a single 4 chassis IRF configuration too, if that was appropriate to the environment.