Hope this helps:
.1.3.6.1.4.1.2011.2.23.1.18.1.17
hwLswSysTemperature OBJECT-TYPE
-- FROM HUAWEI-LSW-DEV-ADM-MIB
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The temperature of system.
For the distributed device, it represents the temperature on the
master slot."
::= { iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) huawei(2011) products(2) lanSw(23) lswCommon(1) hwLswDeviceAdmin(18) hwLswSystemPara(1) 17 }
.1.3.6.1.4.1.2011.2.2.4.17
hwFansStatus OBJECT-TYPE
-- FROM HUAWEI-MLSR-DEV-ADM-MIB
SYNTAX INTEGER {running(0), stopping(1), nofan(2)}
MAX-ACCESS read-only
STATUS mandatory
DESCRIPTION "The current status of system fan: running(0) indicates
the fan is running;stopping(1) indicates the fan is stopping;
nofan(2) indicates no fan in the device. "
::= { iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) huawei(2011) products(2) router(2) huaweiMixinfo(4) 17 }
.1.3.6.1.4.1.2011.2.23.1.18.1.3
hwLswSysCpuRatio OBJECT-TYPE
-- FROM HUAWEI-LSW-DEV-ADM-MIB
SYNTAX Integer32 (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "CPU usage of the system in accuracy of 1%, and the range of value is
1 to 100."
::= { iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) huawei(2011) products(2) lanSw(23) lswCommon(1) hwLswDeviceAdmin(18) hwLswSystemPara(1) 3 }
.1.3.6.1.4.1.2011.2.2.4.12
hwCpuCostRatePer5Sec OBJECT-TYPE
-- FROM HUAWEI-MLSR-DEV-ADM-MIB
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS mandatory
DESCRIPTION "The system CPU average busy percentage in the last 5 seconds period."
::= { iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) huawei(2011) products(2) router(2) huaweiMixinfo(4) 12 }
.1.3.6.1.4.1.2011.2.2.4.13
hwCpuCostRatePer5Minute OBJECT-TYPE
-- FROM HUAWEI-MLSR-DEV-ADM-MIB
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS mandatory
DESCRIPTION "The system CPU average busy percentage in the last 5 minutes period."
::= { iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) huawei(2011) products(2) router(2) huaweiMixinfo(4) 13 }
Good luck
Manfred
