HP-2920-48G-POE+ HP J9150A Transceiver type not supported in this port.

[wmwray]

I'm installing a new HP 2920-48G-POE+ Switch (J9729A) WB.16.02.0014, ROM WB.16.03 and when I install HP J9150A Transceiver I get the message below.  I also have a HummingBird J9150A-HN intalled and receive the same error warning. I assumed the HummingBrid brand receive an error because it is not HP but the other module is.  Any help would be appreciated.

HP-2920-48G-POE+# show tech transceivers

transceivers

Transceiver Technical Information:
Port # | Type | Prod # | Serial # | Part #
-------+-----------+------------+------------------+----------
46 | ?? | ?? | unsupported |
48 | ?? | ?? | unsupported |

The following transceivers have extra information:
Port # Message
-------- -------------------------------------
Port 46 Transceiver type not supported in this port.
Port 48 Transceiver type not supported in this port.

[spgsitsupport · Accepted solution]

Isn't J9150A to go only in optional 10Gb card in the back of the unit, making it A1/A2 (and NOT the front ports, which are only 1Gb)

In the front you would use J4858C