MSR - 2003 - port link-mode bridge is not working as bridge only route mode.

[Amarildo]

Hello guys,

      I need your help, Im trying configuration MSR 2003 and when I defined the interface as mode router work, but when I defined as mode bridge not working. I didnt find any information on manual if is working or not on this router.

bellow de configuration:

*********************************************

Version:

dis version
HPE Comware Software, Version 7.1.064, Release 0615P16

*********************************************

#
vlan 999
#

#
interface Vlan-interface999
ip address 192.168.15.99 255.255.255.0
#

#
interface GigabitEthernet0/0
port link-mode bridge
port access vlan 999
#

>dis ip int br
*down: administratively down
(s): spoofing (l): loopback
Interface Physical Protocol IP Address Description
Aux0 up down -- --
Loop0 up up(s) 172.16.200.18 GERENCIA
Vlan111 down down 192.168.111.1 LAN_ASSAI_LOJA
Vlan999 up up 192.168.15.99 --

<RT_ASSAI_LOJA>ping 192.168.15.98
Ping 192.168.15.98 (192.168.15.98): 56 data bytes, press CTRL_C to break
Request time out
Request time out
Request time out

[RT_-GigabitEthernet0/0]dis this
#
interface GigabitEthernet0/0
port link-mode route
ip address 192.168.15.99 255.255.255.0
#
return
[RT_-GigabitEthernet0/0]ping 192.168.15.98
Ping 192.168.15.98 (192.168.15.98): 56 data bytes, press CTRL_C to break
56 bytes from 192.168.15.98: icmp_seq=0 ttl=128 time=0.717 ms
56 bytes from 192.168.15.98: icmp_seq=1 ttl=128 time=0.560 ms

Somebody can help me?

Thanks in advanced

[jmpk]

Hello ,

If you use L3 Vlan interface and passed that Vlan to Bridge port means you cannot ping directly connected Switch /  End device . Since bridge port is pure L2 interface, i will not perform any routing actions 

Thanks