QoS on JG976A

[Bergamo]

Hi everyone,

on switch JG976A the QoS does not work on ports 25-52, but the same qos policy applied globally works fine on the other ports (1-24). I think there is a bug in the firmware and I tried serious firmwares available in the official site, including the latest firmware.

Bellow is a part of the configuration file:

#
version 7.1.045, Release 3116P02

#

traffic classifier c-adm operator or
if-match acl 3050
#
traffic classifier c-ger operator or
if-match acl 3060
#
traffic classifier c-video operator or
if-match acl 3070
#
traffic behavior b-adm
remark local-precedence 4
#
traffic behavior b-ger
remark local-precedence 7
#
traffic behavior b-video
remark local-precedence 6
#
qos policy p-default
classifier c-ger behavior b-ger
classifier c-video behavior b-video
classifier c-adm behavior b-adm
#

...

#
interface GigabitEthernet1/0/48
port link-type trunk
port trunk permit vlan 1 12 100 211 4094
speed 10
duplex full
qos lr outbound cir 10240 cbs 640000
qos sp
#

...

qos apply policy p-default global inbound
#

p.s.: I tested the prioritization generating traffic with the software iperf