Hi,
I have a 3Com 4400 that I need to vlan. My network is like this:
5500 Vlan1 10.100.155.0 Vlan2 10.100.151.0 Vlan3 10.100.159.0
| |
4400 4400
10.100.159.3 10.100.155.3
| |
4400 - switch I am trying to vlan
I need ports 1-6, 13-18, 25 on the 10.100.159.0 network
I need ports 7-12, 13-18 on the 10.100.155.0 network
Port 4 is the uplink to the 159.0 network
Port 14 is the uplink to the 155.0 network
The 155.0 network is basically a network just for layer 2 taffic that needs to stay segregated from the rest of the network.
I have tried all manners of vlan configurations with tagged and untagged ports but nothing works. What have I done wrong?
Thanks,
P.S. This thread has been moevd from Switching > Legacy to Comware-Based. - Hp Forum Moderator
