9150 problems

[skipdog77]

Recently connected in and found that one of the 9150's was up, but not working. The device was returning a ping, but not working as clients complained they had terrible signal.



I rebooted the AP by turning POE off to the device. When the device booted it was returned to a previous save state and was very out of date. There was a missing SSID, and the only SSID on it was old. It was if the AP reverted back to a previous configuration.



After this, i tried rebooting the other one and the same exact thing happened. The configuration was probably 2 revs old. I reconfigured both and tried to make sure I applied the configuration. It seemed to take. On reboots the configuration seemed to be fine.



I am running 1.5.3 .. I checked the release notes and it seems 1.5.3 has had a problem retaining WPA key configuration.. but the problem I experienced today was far worse than just forgetting the WPA key.



Anyone experience the same thing or know of a fix? I plan on bumping the code to 1.6.1 tomorrow night which requires a hard reset on the APs .. I'm hoping this helps the problem



Skip

[wirelessforever]

I would call 3Com support if the code upgrade does not help as they will need to troubleshoot it possibly.



POM