How to use EVA DCM

[Goran Ciric_2]

I have EVA4400 with CV/BV/DCM unlimited licenses.

I have installed all the software and applied all the licenses. I can't see how I can use DCM in CVor RSM to resize the LUN.

Does somebody knows where I can find document that will show how to use DCM. On HP site I was able to find a lot of information about what DCM should do but I was unable to find any document showig how to acctually use it.

[Sandeep Harikantar]

DCM license will be installed while installing DCM software

below steps to check the license status.

1)Browse to HP Replication Solutions Manager.

2)Perform a global refresh by clicking the Refresh icon under Tools and then click Close in the Global Refresh Monitor window.

3)Select Storage Systems and then select the correct array.

4)Select Actions > View Properties > Licenses to view the license.

[Goran Ciric_2]

Hi Sandeep,

Thank you for your responce. I was able to see DCM license in RSM software. I was looking for any documentation on how to use or configure DCM.

[cnb]

Hi Goran,

Not sure but are you looking for this?

http://bizsupport2.austin.hp.com/bc/docs/support/SupportManual/c01491168/c01491168.pdf

HTH

Rgds,

[Uwe Zessin · Accepted solution]

A quick look into the bits which are called the "RSM documentation" did not reveal anything useful (no surprise...)

However, I've seen a document that seems to give better help although the title might be a bit misleading:

- Dynamic capacity management for SQL Server databases on HP Enterprise Virtual Array technical white paper

http://h20195.www2.hp.com/v2/GetDocument.aspx?docname=4AA2-7142ENW

[Goran Ciric_2]

Hi Uwe,

This is exactly what I needed. Thanks for your help.

[Goran Ciric_2]

Thnaks Uwe.