Stripe size for RAID5

[spp]

System: HP ProLiant DL385 G2
46:00.0 RAID bus controller: Hewlett-Packard Company Smart Array Controller (rev 01)

I have hardware RAID5 on it and want to know what is the stripe size. I don't see any details about this in the controller config utility.

[Wickedsunny]

Do you have ACU Installed.

Check on it.. It should show the block size...

Regards,
Sunny

[Wickedsunny]

If you dont have ACU, then download from

http://h18004.www1.hp.com/products/servers/proliantstorage/software-management/acumatrix/index.html?jumpid=reg_R1002_USEN


You can also check in the Controller Bios. Thats called ORCA - Optional ROM based setup utility. Boot the machine and get to the ORCA and check the stripe size. Select the option to view the Logical Drive.



Regards,
Sunny

P:S - Rate Solutions with points.