This widget could not be displayed.
HPE Community
Disk Enclosures
1859573 Members
6569 Online
110403 Solutions
This widget could not be displayed.
This widget could not be displayed.
This widget could not be displayed.
This widget could not be displayed.
This widget could not be displayed.
This widget could not be displayed.
This widget could not be displayed.
This widget could not be displayed.
This widget could not be displayed.

Re: VA7100 disk drive replacement

 
SOLVED
Go to solution
Timothy P. Jackson
Valued Contributor

‎08-20-2009 07:51 AM

‎08-20-2009 07:51 AM

VA7100 disk drive replacement

I have a drive that failed on my VA7100. I have a replacement disk and I assume that I can just pull the bad one out, wait a couple of minutes and put the new one in.

Is my assumption correct or is there more to it?

Any help would be greatly appreciated!

Thanks,
Tim
0 Kudos
2 REPLIES 2
Torsten.
Acclaimed Contributor

‎08-20-2009 10:55 AM

‎08-20-2009 10:55 AM

Solution

Re: VA7100 disk drive replacement

You should wait until the rebuild is finished before replacing the disk.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Timothy P. Jackson
Valued Contributor

‎08-20-2009 12:23 PM

‎08-20-2009 12:23 PM

Re: VA7100 disk drive replacement

Thanks Torsten!

The rebuild has already finished, I will probably replace the drive tonight.


Tim
0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.