HPE Community
Disk
1823119 Members
3247 Online
109646 Solutions
New Discussion

Re: Raid-compatibility of HDD with different model

 
PaWeLL
Occasional Contributor

‎10-15-2015 05:59 AM

‎10-15-2015 05:59 AM

Raid-compatibility of HDD with different model

Hello. We have old HP ML150 G6 with two SATA disks (ATA MB1000EBZQB) in RAID. One disk is going to die and we ordered new disk with P/N:  454146-B21. But new disk's model is MB1000EAMZE. So question is: are these disks similar. Will they be raid-compatible?

0 Kudos
2 REPLIES 2
www_tank
Occasional Visitor

‎04-14-2016 12:39 AM

‎04-14-2016 12:39 AM

Re: Raid-compatibility of HDD with different model

No doubt! The disk is fully compatible (see table :) ) : 

http://servergid.ru/produkciya/servery/servery-hp/hp-compaq-hard-disk-drives

0 Kudos
Torsten.
Acclaimed Contributor

‎04-14-2016 06:49 AM

‎04-14-2016 06:49 AM

Re: Raid-compatibility of HDD with different model

Model MB1000EAMZE is spare part 454273-001 ,

Model MB1000EBZQB  is spare part 454273-001 ,

 

so the drives are equivalent, even it is a different model with different firmware but same specs, see

http://h20565.www2.hpe.com/hpsc/doc/public/display?sp4ts.oid=316573&docId=emr_na-c00305257&docLocale=en_US


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.