1748165 Members
3731 Online
108758 Solutions
New Discussion

Raid-compatibility of HDD with different model

 
PaWeLL
Occasional Contributor

Raid-compatibility of HDD with different model

Hello. We have old HP ML150 G6 with two SATA disks (ATA MB1000EBZQB) in RAID. One disk is going to die and we ordered new disk with P/N:  454146-B21. But new disk's model is MB1000EAMZE. So question is: are these disks similar. Will they be raid-compatible?

2 REPLIES 2
www_tank
Occasional Visitor

Re: Raid-compatibility of HDD with different model

No doubt! The disk is fully compatible (see table :) ) : 

http://servergid.ru/produkciya/servery/servery-hp/hp-compaq-hard-disk-drives

Torsten.
Acclaimed Contributor

Re: Raid-compatibility of HDD with different model

Model MB1000EAMZE is spare part 454273-001 ,

Model MB1000EBZQB  is spare part 454273-001 ,

 

so the drives are equivalent, even it is a different model with different firmware but same specs, see

http://h20565.www2.hpe.com/hpsc/doc/public/display?sp4ts.oid=316573&docId=emr_na-c00305257&docLocale=en_US


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!