SC10, FC10, DS2300, HVD10

[Muhammad Jahangir Mirza]

Hi,
1.I like to know i have different kinds of disk systems like SC10, FC10, DS2300 and HVD10 im im going to use in full bus mode kindly tell me how to configure this disksystems.
2.Another thing i like to know if the harddisk is going to be faulty we all know the led shows which one is faulty by the hardware and from IOSCAN we can see as well (NO_hardware)but in the disksystem it cant show any led except the disksystems led not the harddisk LED kindly tell me how to know which harddisk is faulty

[Hoang Chi Cong_1]

Hi.
1. You can read in the technical documentation go with the device.
2. Normally, you can find down exactly which harddisk error by using ioscan command:
ioscan -fnC disk
If you install command view sdm. You can find it easy. But now you using the disksystem so that I think only using command is the best way.
In case only the systemdisk LED shows, may be the problem is not belong to disk failure, it may be in the link card.

Hope this helps for you.
Jim

[Zygmunt Krawczyk]

The manuals for these disk systems:

for ds2300
http://h20000.www2.hp.com/bizsupport/TechSupport/DocumentIndex.jsp?contentType=SupportManual&locale=en_US&docIndexId=179911&taskId=101&prodTypeId=12169&prodSeriesId=81148

for fc10

http://h20000.www2.hp.com/bizsupport/TechSupport/DocumentIndex.jsp?contentType=SupportManual&locale=en_US&docIndexId=179911&taskId=101&prodTypeId=12169&prodSeriesId=33743

for hvd10

http://h20000.www2.hp.com/bizsupport/TechSupport/DocumentIndex.jsp?contentType=SupportManual&locale=en_US&docIndexId=179911&taskId=101&prodTypeId=12169&prodSeriesId=33745

for sc10

http://h20000.www2.hp.com/bizsupport/TechSupport/DocumentIndex.jsp?contentType=SupportManual&locale=en_US&docIndexId=179911&taskId=101&prodTypeId=12169&prodSeriesId=33747

Regards,
Zygmunt