- Community Home
- >
- HPE Community, Korea
- >
- HP-UX
- >
- RP7410 EMS 및 MP(ps) 로그 관련 질문입니다.
HP-UX
1754324
회원
2699
온라인
108813
솔루션
포럼
범주
Company
Local Language
뒤로
포럼
토론 게시판
포럼
- Data Protection and Retention
- Entry Storage Systems
- Legacy
- Midrange and Enterprise Storage
- Storage Networking
- HPE Nimble Storage
토론 게시판
토론 게시판
포럼
토론 게시판
뒤로
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
- BladeSystem Infrastructure and Application Solutions
- Appliance Servers
- Alpha Servers
- BackOffice Products
- Internet Products
- HPE 9000 and HPE e3000 Servers
- Networking
- Netservers
- Secure OS Software for Linux
- Server Management (Insight Manager 7)
- Windows Server 2003
- Operating System - Tru64 Unix
- ProLiant Deployment and Provisioning
- Linux-Based Community / Regional
- Microsoft System Center Integration
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
블로그
정보
커뮤니티 언어
언어
포럼
블로그
- 신규로 표시
- 북마크
- 구독
- 소거
- RSS 피드 구독
- 강조
- 인쇄
- 부적절한 컨텐트 신고
날짜: 06-22-2007 10:00 PM
날짜: 06-22-2007 10:00 PM
RP7410 EMS 및 MP(ps) 로그 관련 질문입니다.
model : rp7410
os : hpx-11.11
event.log 에서 아래와 같은 메시지를 하루에 1번씩 뿌려지고 있습니다.
전압 체크 및 케이블 점검도 해봤으나 정상입니다.
파트가 fail인거 같은데...
firmware 작업을 먼저 해야 하는지? 아님 파트를 교체 해야 하는지 문의 드립니다.
교체를 해야 한다면 작업순서 및 주의사항이 있는지 알려주십시요..^^;
>------------ Event Monitoring Service Event Notification ------------<
Notification Time: Fri Jun 22 00:54:04 2007
enala01 sent Event Monitor notification information:
/system/events/core_hw/core_hw is >= 1.
Its current value is SERIOUS(4).
Event data from monitor:
Event Time..........: Fri Jun 22 00:54:04 2007
Severity............: SERIOUS
Monitor.............: dm_core_hw
Event #.............: 62
System..............: ??????
Summary:
AC power not present on line 1 in compute cabinet 0
Description of Error:
AC power is not present on the specified line. The system is configured
to expect AC power on this line.
Probable Cause / Recommended Action:
The power has been disconnected.
Reconnect the power cord.
A power failure has occurred on the power grid.
Investigate and fix the power failure, or wait for the failure to be
corrected.
Additional Event Data:
System IP Address...:
System IP Address...: System IP Address...:
Event Id............: 0x467a9f1c00000000
Monitor Version.....: B.01.00
Event Class.........: System
Client Configuration File...........:
/var/stm/config/tools/monitor/default_dm_core_hw.clcfg
Client Configuration File Version...: A.01.00
Qualification criteria met.
Number of events..: 1
Associated OS error log entry id(s):
None
Additional System Data:
System Model Number.............: 9000/800/rp7410
OS Version......................: B.11.11
STM Version.....................: A.47.00
EMS Version.....................: A.04.00
Latest information on this event:
http://docs.hp.com/hpux/content/hardware/ems/dm_core_hw.htm#62
v-v-v-v-v-v-v-v-v-v-v-v-v D E T A I L S v-v-v-v-v-v-v-v-v-v-v-v-v
>---------- End Event Monitoring Service Event Notification ----------<
================================================================================
MP:CM> ps
Display detailed status of the selected MP bus device.
The following MP bus devices were found:
+---+----+----+-----+-----+-------+-----+
| | | | | | | |
| | |LAN\| Sys | | IO | |
|Cab| MP |SCSI|Bkpln|Cells|Chassis| BPS |
| # |M S|0 1| | 0 1 | 0 1 | 0 1 |
+---+----+----+-----+-----+-------+-----|
| 0 |* | *| * | * | * * | * * |
+---+----+----+-----+-----+-------+-----+
You may display detailed power and hardware status for the following items:
T - Cabinet
S - System Backplane
G - MP (Core I/O)
P - IO Chassis
C - Cell
Select Device: t
HW status for rp7410 cabinet : NO FAILURE DETECTED
Power switch is on
Right Door is closed
Top Door is closed
Left Door is closed
Total Power Available 5400 VA
Total Power Needed 1494 VA
Power Redundancy : redundant
Power Viability : viable
Power Status
---------------+-----+-----+-------+-----+
| | | | |
| Sys | | IO | |
|Bkpln|Cells|Chassis| BPS |
| | 0 1 | 0 1 | 0 1 |
---------------+-----+-----+-------+-----|
Populated | * | * | * * | * * |
Enabled | * | * | * | * * |
Power OK | * | * | * | * * |
Warning/Fault | | | | |
Attention LED | | | | |
AC Line status:
Line A0 Present
Line A1 NOT PRESENT
Line B0 Present
Line B1 Present
Front Fan Speed : normal
Rear Fan speed : normal
I/O Bay Fan Speed : normal
Temperature state : normal
Fan Redundancy : redundant
Overtemp Shutdown Enabled
| BPS | PCI |
| Fans| Fans |
| 0 1 | 0 1 2 3 4 5 |
+-----------+-----+-------------+
Populated | * * | * * * * * * |
Failing | | |
Failed | | |
| Standby/Main Fans |
| |
| 0 1 2 3 |
+-----------+-------------------+
Populated | * * * * |
Failing | |
Failed | |
| Cell Fans |
| 0 1 2 3 4 |
+-----------+-----------+
Cell 1 | |
Populated | * * * * * |
Failing | |
Failed | |
===========================================================================
MP:CM> sysrev
Cabinet FPGA and Firmware revision report
System Backplane : GPM FM OSP
------- ------- -------
1.002 1.002 1.002
PCI Backplane : LPM HS
------- -------
1.002 1.000
LPM BOB DRAIN PDHC PDC
------- ------- ------- ------- -------
CELL 0 : 0.000 0.000 0.000 0.000 0.000
CELL 1 : 2.002 1.000 1.001 2.004 17.005
FPGA MP
------- -------
Master Core IO : 2.008 4.020
Slave Core IO : 0.000 0.000
4 응답 4
- 신규로 표시
- 북마크
- 구독
- 소거
- RSS 피드 구독
- 강조
- 인쇄
- 부적절한 컨텐트 신고
날짜: 06-22-2007 10:00 PM
날짜: 06-22-2007 10:00 PM
RP7410 EMS 및 MP(ps) 로그 관련 질문입니다.
안녕하십니까
AC power not present on line 1 in compute cabinet 0
뒤에서 보았을때 왼쪽에서 두번째(A1) 의 파워케이블을 힘껏 밀어보시십오(종종 서버 연결부분 그리고 PDU 연결부분이 살짝 빠지는 경우 있습니다.)
그리고 전면에 보았을때 BPS의 LED가 정상인지 확인해보십시오
메시지로 보아 전원케이블의 연결 상태가 좋지 않은것 같습니다.
먼저 attention LED가 amber 상태(MP 로그가 생성된다면)라면 파워케이블을 단순히 EMS만 생성된다면 EMS 버전을 2007년 6월 버전으로 올려보십시오
감사합니다.
AC power not present on line 1 in compute cabinet 0
뒤에서 보았을때 왼쪽에서 두번째(A1) 의 파워케이블을 힘껏 밀어보시십오(종종 서버 연결부분 그리고 PDU 연결부분이 살짝 빠지는 경우 있습니다.)
그리고 전면에 보았을때 BPS의 LED가 정상인지 확인해보십시오
메시지로 보아 전원케이블의 연결 상태가 좋지 않은것 같습니다.
먼저 attention LED가 amber 상태(MP 로그가 생성된다면)라면 파워케이블을 단순히 EMS만 생성된다면 EMS 버전을 2007년 6월 버전으로 올려보십시오
감사합니다.
- 신규로 표시
- 북마크
- 구독
- 소거
- RSS 피드 구독
- 강조
- 인쇄
- 부적절한 컨텐트 신고
날짜: 06-22-2007 10:00 PM
날짜: 06-22-2007 10:00 PM
RP7410 EMS 및 MP(ps) 로그 관련 질문입니다.
EMS와 SL(MP)로그가 같이 생성됩니다.
A1전원 케이블과 B0 케이블을 바꿔서 입력했을때 같은현상이 유지됩니다.
AC Line status:
Line A0 Present
Line A1 NOT PRESENT
Line B0 Present
Line B1 Present
A1전원 케이블만 연결한 상태는 standby power led 가 점등되지 않습니다.
A1전원 케이블과 B0 케이블을 바꿔서 입력했을때 같은현상이 유지됩니다.
AC Line status:
Line A0 Present
Line A1 NOT PRESENT
Line B0 Present
Line B1 Present
A1전원 케이블만 연결한 상태는 standby power led 가 점등되지 않습니다.
- 신규로 표시
- 북마크
- 구독
- 소거
- RSS 피드 구독
- 강조
- 인쇄
- 부적절한 컨텐트 신고
날짜: 06-22-2007 10:00 PM
날짜: 06-22-2007 10:00 PM
RP7410 EMS 및 MP(ps) 로그 관련 질문입니다.
안녕하십니까
로그만 보아서는 A1 에 전원이 공급되지 않아 발생하는 메시지 같은데 ....
혹시 (상관없겠지만 )
CM> pwrgrd
명령어로 현재 상태을 확인해보십시오
3. Grids A & B (Cords A0,A1,B0,B1 required) 이 선택되어 있어야 합니다.
.....
SL로그을 첨부합니다.
sl
sel
e
t
d
sl
sel
e
d
별도움이 안되어죄송합니다.
로그만 보아서는 A1 에 전원이 공급되지 않아 발생하는 메시지 같은데 ....
혹시 (상관없겠지만 )
CM> pwrgrd
명령어로 현재 상태을 확인해보십시오
3. Grids A & B (Cords A0,A1,B0,B1 required) 이 선택되어 있어야 합니다.
.....
SL로그을 첨부합니다.
sl
sel
e
t
d
sl
sel
e
d
별도움이 안되어죄송합니다.
위에 명시된 의견은 Hewlett Packard Enterprise가 아닌 저자의 개인 의견입니다. 이 사이트를 사용하면 이용 약관에 동의하게되며 참여 규칙 .
뉴스 및 이벤트
© Copyright 2024 Hewlett Packard Enterprise Development LP