3par 7200 latest update

[canervural]

hello,

i have 3par 7200 and Current version 3.2.2.612 (MU4)+P56,P59,P94,P98,P113,P118,P133,P148,P161.

i tired to try upgrade to latest version.

how can i do step by step lupgrade atest version ?

[Cali]

Hi,

Go to: SPOCK Home > Other Hardware > 3PAR > HPE 3PAR OS and Service Processor Upgrade Matrix

This XLS shows the correct path for an Upgrade.

Cali

[canervural]

@Cali 

thank you for your help. but i have new problem.

when i do upgrade from 3.2.2 to 3.3.1, SP says me ,"You do not have the authority to perform the update. Contact HPE support for assistance."

how can i pass this?

[Cali]

And you follow the Full Path?

Upgrade to SP 4.4 MU9
Upgrade to 3.3.1 MU3
Upgrade to SP 5.0.5
Upgrade to SP 5.0.7
Upgrade to SP 5.0.9, then to SP 5.0.9.2
Upgrade to 3.3.1 MU5
Upgrade SP to SP 5.1.1.0

At what stage are you?

My personal Note:
3.3.1 need to mutch RAM and local Disk Space for 7200, I leave all 7200 Systems at 3.3.1 MU6.

And if to take a look in this Table:
SPOCK Home > Software > 3PAR Array Software > Active-Inactive Status of HPE 3PAR OS
You see, that for 7200 3.3.2 MU6 is default and higher as 3.3.1 MU2 is Not recommended.
If you have urgend a need for 3.3.1, you need to check your System from Support before doing the Update.
This is the meaning of the Warning.

Cali

[canervural]

hello, 

The SP is 5.0.9.2 now,

OS 3.2.2. last update installed.

when i upgrade from 3.2.2 to 3.3.1 EGA , i see that warning and dont go next.

i will try 3.3.1. MU5.

thank you.

[canervural]

I got the same error for 3.3.1.MU5.

[Cali]

Go to 3.2.2 MU6 and all Patches.

3.3.1 must be Qualified by Support, because it may be too big for the 7200.

You may bring your System Down if, for example, the local Disk running out of Space during the Update.

However, if you don't have Support for your System, you are not allowed to Download and Update to the newer Firmware/OS.

Cali

[canervural]

thank you your answer,

no i have two 3par, 3par 7200 our old storage,there is no data on the 7200.

i will try 3.2.2. MU6 after 3.3.1.

[canervural]

@Cali hello again,

You do not have the authority to perform the update. Contact HPE support for assistance.

same warrning fot 3.2.2. MU6. You do not have the authority to perform the update. Contact HPE support for assistance.

[Vinky_99]

@canervural

Good day!  

I guess you should contact the HPE Support team for further assistance. They will be able to help you.....