HPE 3PAR StoreServ 7200 2-N Storage Base and HPE M6720 3.5in 4U SAS Drive Enclosure

[Kamir]

Hello everyone.
Help me solve the problem with errors after an emergency shutdown. The equipment is no longer supported.
Errors occurred after an emergency shutdown (screenshot attached).

errors 

At the same time, everything is working (screenshot attached).

disk status 
Equipment: HPE 3PAR StoreServ 7200 2-N Storage Base and HPE M6720 3.5in 4U SAS Drive Enclosure
Thank you!

[Cali]

There are multiple Issues here.

The storage has no admin connection (1GB LAN on Mgmt Port).

Someone tried to change the Management IP configuration with setnet, but did not finish with "setnet finish -f".

It seems that the Fibre Channel is incorrectly connected.

Some Disks are defective but still working.

Cali

[Kamir]

Hi

No work was performed on the equipment. These errors occurred after an emergency power outage.

[Cali]

Well, I would say that the errors were there long before and nobody just noticed them.
Cali