HPE Community
HPE 9000 and HPE e3000 Servers
1821056 Members
2486 Online
109631 Solutions
New Discussion

APC UPS Powerchute software cannot communicate with HP L1000 Server

 
william Chua Teck Chuan
New Member

‎09-03-2000 04:58 PM

‎09-03-2000 04:58 PM

APC UPS Powerchute software cannot communicate with HP L1000 Server

I've connected the APC UPS through an APC shareout (with 8 output) to 2 nos of L1000 server (Unix) and 2 nos of LH4 (NT) server. The Communication between the LH4 is fine. APC UPS's Engineer has inform me that we need to configure the RS232 port on the LH4 server. Kindly advise how can we configure the 3 ports on LH4 Server.

P.S: 3 ports- 1 is used for web console
1 is used for re-mote modem
1 is used for general purpose
William Chua
0 Kudos
1 REPLY 1
Lim_2
Occasional Advisor

‎04-05-2001 12:44 AM

‎04-05-2001 12:44 AM

Re: APC UPS Powerchute software cannot communicate with HP L1000 Server

Hi , pls refer to the document for the unsupported powerchute_plus for HP-UX server
configure as simple signaling for Series 300 and 800 . That's mean you only can connect one L class to the advanced port (smart signaling ) on share ups .
0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.