PA_RISC

[Jerry L. Sims]

Hello All,

I was asked if our system was "PA-RISC 1.1".
Not sure what this means. Does anyone know how I can find out this information ?
****************
HP-UX it-hp54 B.11.11 U 9000/800
****************

[Steven E. Protter · Accepted solution]

Because your system is running 64 bit HP-UX 11.11 it is a PA-RISC system.

You can run PA-RISC 1.1 and 2.0 binaries.

SEP

[Michael Tully]

These will help. Just use the output from 'model'

http://devrsrc1.external.hp.com/STK/serversupport.html
http://h21007.www2.hp.com/dspp/tech/tech_TechDocumentDetailPage_IDX/1,1701,2121,00.html

[Isralyn Manalac_1]

Hi,

You can execute this command:

#file /stand/vmunix

and it will tell you which PA-RISC version your system has.

Ira

[Joshua Scott]

PA-RISC 1.1 = most 32-bit
PA-RISC 2.0 = 64-bit

the output of the 'model' command would be helpful.

If your system is a PA-7000 or higher, then it is PA-RISC 1.1

PA-RISC 1.0 Models:
600, 635, 645, 800, 808, 815, 822, 825, 832, 834, 835, 840, 842, 845, 850, 852, 855, 860, 865, 870, 890

Josh