3500yl Firmware K.15.06 savepower led configuration issue

[Helper]

Hi,

I do not obtain the awaited behaviour configuring this feature.

Using "savepower led timer now" or with schedule the result is the same no led off on the device.

A "show savepower led" provide me these informations :

3500yl(config)# show savepower led

 LED Save Power Information

 Scheduled Start Time   : 10/26/11 12:04:08
 Duration (HH:MM)       : 00:00
 Recurrent Status       : Disabled
 Configuration Status : Disabled

I think the problem is relevant to the configuration status, but i can't find how to change it to enable ?

The actual documention and older management configuration guide do not deal with this option, or simply do not show it ?

what do you think of ?

Thanks in advance.

[jefflj]

That appears to be a bug in the software.  Please contact your HP Networking support team.

[Helper]

Hi,

I have made a comparative test on a 8200 chassis, and i saw a command "savepower led all". If it is working on a chassis, this command is not not available on a 3500 stand-alone switch.

3500yl(config)# savepower led
Unable to create.

I will escalate this behaviour.

Thanks

[Helper]

Hi,

This was a bug, it is fix for me in K.15.07.xxxx, but there are other bugs now

- configuration conversion from K.15.xx to K.15.07, the source-interface configuration is lost

- PIM DM, the process freeze with malloc free messages ...

Bye,