ACL and VLANs on e2620

[miradroid]

Hi,

I have a HP e2620 24 PoE with 3 VLAN  with IP routing enabled :

VLAN 1 : office network - 192.168.1.0/24 - ports 1-12

VLAN 2 : guest network - 192.168.2.0/24 - ports 13-24

VLAN 3 : internet access - 10.39.0.0/30 - port 25 - connected to ISP router

I would like to block communications between VLAN 1 & 2.

Is it possible ?

It seems we can't apply ACL to VLAN with this switch (Am I wrong ?) so I tried this :

access-list 10 deny 192.168.2.1/24

access-list 10 permit 0.0.0.0 255.255.255.255

ip access-group 10 in (on ports 1-12)

but it didn't work ...

Any idea ?

P.S. this thread has been moved from Switches, Hubs, Modems (Legacy ITRC forum) to ProCurve / ProVision-Based. - Hp Forum Moderator

Thanks