Can't Log onto the System Information

[beeatwork]

Switch to a new router I no longer can log into my Procurve Switch 1700-8 even after did a hard reset, it should be back to the default 192.168.2.10.  Why any suggestions, it's working except I can get into the swith!  Thanks!

[SCOOTER]

I presume you configured your laptop/desktop for the default IP range so you can access it. If you made any changes to the management VLAN you can follow this process:

http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&objectID=c02596805&jumpid=reg_r1002_usen_c-001_title_r0001

If not and the loop between port 1 and 2 at boot for at least 40 seconds does not reset the unit to factory defaults contact HP for a warranty exchange if the unit is covered.

[beeatwork]

Thanks!  Got it to work after rebooting the switch again!