CLI Interface problem

[JA03]

I am new to HP networking coming from Cisco.  I use my Command Prompt in Windows 7 to telnet to the switches in our environment.  However, when I telnet to an HP switch and do a "show run", I can't view the entire output.  The terminal window won't scroll up like it does for the Cisco switches.  I've tried to use the "terminal length" and "Screen-length" commands but that just scrolls a bunch of lines - cuts the running config output in half.  Can anyone help me?  Should I be using something else to telnet to the switches?  Thanks in advance.

[Chrisd131313]

Hi JA03,

I would recommend using something like putty. It works a lot better than the windows telnet cmd.

HTH