Compatible SFPs for 2610 or the other way round

[Matthew Lucas]

Guys,

I'm struggling to find a compatibility list for min-GBIC SFPs for the 2610 series switches (and 2910).

We have both in our environment, and I'd like to use JD119b MM/SM LC fibre as it matches our requirements rather well. However I can't find if it's compatible with these switches (2610-24PWR, 2610-24/12PWR, 2610-48PWR and 2910). 

Alternatively, does anyone know of another similar SFP that matches the requirement (same price point, 1gbps, multimode and single mode) that IS compatible?

For info, requirement is:

(relatively) low cost

either multimode/single mode or just single mode

LC connector

fibre type 50/125 OM3 LOMMF or 9/125 OS2 SM

distances - 50m -> 10km (or minimum 50m -> 1km)

I want to aim for a single platform that will cover all these requirements - therefore if I can get single mode transceivers that won't break the bank (several hundred dollars, not several thousand) then I'll probably go for them as the difference in cost of cable per metre is insignificant. However compatibility with the 2610's is pretty vital (unless it's absolutely not an option).

Thanks in advance, guys.

[Patrick R]

This are the only SFP tranceivers you can use to interconnect the 2610 and 2910. The once you are trying to use are former 3com products while you have procurve devices. under accessoiries tab

http://h17007.www1.hp.com/us/en/products/switches/HP_E2610_Switch_Series/index.aspx 

or

http://h17007.www1.hp.com/us/en/products/switches/HP_E2910_al_Switch_Series/index.aspx

• »HP X121 1G SFP LC SX Transceiver (J4858C)
• »HP X121 1G SFP LC LX Transceiver (J4859C)
• »HP X121 1G SFP RJ45 T Transceiver (J8177C)

[Mik-HPN]

Transceiver support matrix

http://bizsupport1.austin.hp.com/bc/docs/support/SupportManual/c02605446/c02605446.pdf

The JD119b might (most likely not) work and is not supported.