Distributed trunking 5406 with sfp modules

[joem1k]

With  a 10G-GbE SFP+ v2 zl Module

# switch-interconnect B1  >>does not work

With a 10GBase-T v2 zl Module  it works

HP-E5406zl-GBVDISW01(config)# sh switch-interconnect

Port         : C1
Status       : Up
Active VLANs : 1,3-4,189,237

i can not find any restrictions on using an SFP module.

Any ideas why it will not work with a SFP module

thanks,

joe

[joem1k]

Grrr customer was using Cisco sfp's.....  Problem solved...

[Jeff Carrell]

Yep, HP-ProVision (aka ProCurve) require HP branded SFP's......otherwise, system will see "something" inserted, but not work with it.