how to change time on the HP 2530 switch J9778A

[roland tignor]

We had received a new HP 2530 switch J9778A. Can the time be changed from it's webpage or telnet?
If so, where is that at?

P.S. this thread has been moved from Switches, Hubs, Modems (Legacy ITRC forum) to ProCurve / ProVision-Based. - Hp ForumModerator

[Surreal]

Hi,

Check the manual for the various CLI commands https://support.hpe.com/hpesc/public/docDisplay?docLocale=en_US&docId=c03844800  Moderator [above link is no longer valid, please visit https://support.hpe.com/connect/s/  to find the latest info ]

There is a "time" / "timezone" etc. Do not forget to get in config mode and type "time ?" for more help. Usually though the switch gets the time from the network (SNTP).

Alternative go through the "setup" (see manual)

[roland tignor]

Can the time be changed from it's webpage or telnet?

[GordoSan]

You can do this by login on to the console:

Type:> Configure

Type :>Clock Set 13:08 

Type :>Clock Set 06/11/2015   

The manual does seem to completely useless in this respect.

Gordon

[MikeGlonet]

 thx , it worked perfectly

[HARPOC]

Hi Gordon.

Is possible sincronize the time With SNTP Server in this model?

How?

Thanks from SPAIN!

[botva]

GordoSan
i'm just registred to say thanks.