HP-2920-48G upgrade from WB.15.13.0008 to 16.04.0016

[WW451638]

Hi

i joined a new company, they use HP Switeches which never updated in the last 5 years.

We are planning a firmware upgrade from 15.13.0008 to 16.04.0016 on HP-2920-48G switches.

my quastion is could we upgrade it directly from 15.13.0008 to 16.04.0016 or is there any major update which we need to do it first?

Thanks in advance

Farshad

[parnassus]

Why upgrading only to 16.04 when you could upgrade to latest 16.10 (WB.16.10.0002)? See here.

Pay attention that such old software version (15.13.0008) will require the BootROM to be updated too...this will happen automatically (and will causes a double reboot, the very first to update the BootROM image, the second to update the Software).

Moreover to upgrade to 16.10 HPE suggests to first update to 16.08 as interim:

"Software Release WB.16.10.0002

UPGRADE NOTE: HPE recommends that you update to this software from one of the three previous releases (WB.16.08 xxxx - WB.16.10.xxxx). If your switch is running an earlier version of software, incremental updates are recommended. Please follow 'Best Practices for Software Upgrade' section of the HPE ArubaOS-Switch Basic Operations Guide Version 16.08 for guidelines about configuration compatibility during upgrade.

IMPORTANT: This software includes an update to BootROM WB.16.03. If your switch has an older version of BootROM, the BootROM will be updated with this software. Do not interrupt power to the switch during this important update!"

The same happens to upgrade to 16.08...HPE suggest to step into 16.06 first...and to upgrade to 16.06 HPE, again, suggest an interim upgrade to 16.03 first...the loop continues...and to arrive on 16.03 is suggested to upgrade to 15.18 first (which is "near" to your current very old 15.13), 15.18 seems to not require an interim release before it.

Be prepared to perform these jumps 15.13 --> 15.18 --> 16.03 --> 16.06 --> 16.08 --> 16.10 and almost each jump (excluding probably latest three) will force a BootROM automatic update (dual reboot).

Reference here. Read carefully each Release Notes of any software version you plan to use.

[JasonkW]

Hello there,

Sorry I understand this is a fairly old post.... I am also new to Aruba too.

The switches (J9836A) in the office are running very old version, WB 16.03... I can see there are 3 different "major" release???? 16.08, 16.09, and 16.10 - does that I mean I can upgrade to any of those? 

If upgrading from 16.03, can I go directly to say 16.10?  Thank you very much.