HPE Community
HPE Aruba Networking & ProVision-based
1832609 Members
2338 Online
110043 Solutions
New Discussion

HP 2920 Switch SNMP Traps

 
Braclad
Occasional Contributor

‎04-19-2018 04:10 AM

‎04-19-2018 04:10 AM

HP 2920 Switch SNMP Traps

Our HP 2920 switch stacks are not generating an SNMP trap when a member of the stack fails.

We also are not getting a trap when one of the PSU inputs (J9739A) fail.

Has anyone had similar issues?

Thanks

Mike

1 person had this problem.
0 Kudos
1 REPLY 1
racowi
Frequent Advisor

‎05-11-2018 08:29 AM

‎05-11-2018 08:29 AM

Re: HP 2920 Switch SNMP Traps

I'm looking for the same. I'm using a 2930M.
At least I get some SNMP traps from stack but not to easy to know which stack is currently down.
And for the PSU, I'm receiving a trap but it's really a "Event Message", not a specific PSU OID.

0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.